Dairy Parlors
& Vet Rooms     

From a showplace of masonry and tile - to a reasonably priced utility design,
VBS uses the superior technology of tilt-up foam core panels to ensure efficiency
in your project’s budget and your monthly energy costs.

BEAUTY WITHIN A BUDGET
Get the best of both worlds with a VBS Solid-Core parlor. Tilt-up panels will speed up building completion.
All combines with water resistance and fifty percent better R values.

WHEN BUDGETS ARE TIGHT
All the value of foam core panels with a great savings in labor.
Just tilt up the totally finished panels and put in your doors and windows

HOLDING AREAS, INTENSIVE CARE, AND YOUNG STOCK BARNS
Single-source VBS Pre-engineered Packages

HOLDING AREAS
VBS Post-frame construction, insulated climate control ceiling systems, or a simple inexpensive insulated roof
 

  Solid Core Buildings
   (Built with Structural Insulated Panels)

Structural insulated panels are high-performance building panels used in exterior walls, roofs, and floors. The panels are made by sandwiching a core of rigid foam between two skins of wood structural panels, Typically oriented strand board (OSB). The Solid Core System starts with high performance rigid foam insulation chemically bonded to orientated strand board or plywood.

Depending on the size and needs of the structure, the thickness of the foam is adjusted to increase R-value. In Dairy Parlor builds, 6" Solid Core Panels are typically used, giving the dairyman a value of R-26 as opposed the R-19 value attributed to a standard studwall with fiberglass insulation. In a comparison from The Brock University, the studwall with fiberglass actually had 68% more leakage when competing against these 6" solid core panels.

When considering your next parlor, build with the best of both worlds with EPS solid-core. These tilt-up panels speed up building time, decreasing labor costs. By combining these features with water-resistance and a 50% better R value. It’s easy to see the showcase in energy-efficiency, and the money-saving functionality of a solid-core dairy parlor.

 

...AND LET’S NOT FORGET THE COMFORTS OF HOME
Offices, Break, Utility and Milk Rooms


EPS’s state-of-the-art bond is used to seal fiberglass-reinforced panels
so tightly the two become one.

No wood-rot. All the energy savings.

These panels are up to 15 times more air-tight, and when
combined with other energy-efficient technology, are more
efficient than any stick building. Ask us about these tilt-up foam
core panels with built-in fiberglass reinforced panels for your
next parlor, and learn about the efficiencies of building the right
way the first time.

See below, a parlor built using the standard stick building method.

The moisture involved with years of high humidity levels in this parlor, combined with several hose-downs over this room’s lifetime, contribute to the distortion of this interior surface.

The gaps created from the excessive moisture and the insufficient means of fastening the fiberglass interior to the frame, contribute to the extreme
wood-rot and mold that’s living beneath the surface of this parlor wall.

With EPS’s solid core tilt-up paneling you can sleep well at night knowing your parlor’s interior isn’t eroding the core of your building.