Selection of scrapers for alleys on concrete or rubber mat, with or without groove for chain. 

  • Three basic models of scrapers are offered for 7/8" and pintle chains: 16° scraper, straight scraper and V-shape scraper.
  • The chain groove ensures the scraper remains centered widthwise and keeps the chain below the floor in order to maintain cow comfort.
    • ऊ
  • Adjustable folding ends are available on 16° scraper in order to keep the scrapers centered in alleys without groove. 
IMG_XX_WithChain16TiltingScraper_1.png

16° Tilting Scraper with replaceable
steel blades and folding ends.

Adjustable flexible blades available for alleys
with rubber mat and to better clean concrete
alleys. Tilting blades start to clean the alley
at the very beginning of the stroke and draw
less bedding on the back stroke.
Shown with optional center hinge.

 
IMG_XX_WithChainScrapersStraightScraper_1.png

Straight Scraper with replaceable
steel blades.

Adjustable flexible blades available for alleys
with rubber mat and to better clean alleys on
concrete. Installation in a groove only.

 
 IMG_XX_WithChainScraperVShapeScraper_1.JPG
V-Shape Scraper with replaceable steel blades. Steel blades can be adjusted in order to compensate for wear.
 
 IMG_XX_WithChainScraperVShapeLowFriction_1.png
V-Shape with low-friction nylon rollers and round edges for use in alleys with rubber mat.
IMG_XX_Scrapers16TiltingScrapers_1.png
16° Tilting Scraper
 with steel wear blades and standard folding ends for manure alleys with or without groove. Tilting blades start to clean the alley at the very beginning
of the stroke and draw less bedding
on the back stroke
IMG_XX_Scrapers16TiltingScrapersWithAdjFlexBlades_1.png
16° Tilting Scraper with
Adjustable Flexible Blades
for rubber mat and to better clean
concrete alleys. Draw bar for groove
available.
 IMG_XX_ScrapersOptAdjFoldEnd_1.JPG
Optional Adjustable Folding End
 The 16° scraper is available with folding ends adjustable widthwise to keep the scraper centered in a manure alley without groove. The width of the alley must be even.
 IMG_XX_ScrapersOptionalHinges_1
Optional Hinges
 on 16°scraper to fold arms towards
the center of alley. To allow circulation
for bedding purpose.
 

V-Shape Scraper

IMG_XX_ScrapersVShapeScraper_1.png

V-Shape Scraper
 with steel wear blades.

  • Steel blades can be adjusted
    in order to compensate wear.

  • Model with low-friction nylon
    rollers and round edges also
    available for use in alleys with
    rubber mat.

  • Shown with draw bar running
    in a groove.